Skip to content
Appliqué Maker

Converter

HUS to PES converter

Turn a HUS file (older Husqvarna Viking machines) into PES (Brother, Baby Lock and older Bernina machines). Drop the file, pick PES as the output, download. Runs in your browser; nothing is uploaded.

Drop an embroidery file or click to choose
PES, PEC, DST, EXP, JEF, VP3, XXX, HUS, VIP, SEW, PCS · stays on your device

What this conversion keeps and changes

HUS is a compressed Husqvarna format. It is decoded fully in the browser and rewritten as a PES version 1 file; the colour palette maps to the nearest Brother thread.

Inside a HUS file

  • Read by: older Husqvarna Viking machines.
  • Colours: colours as indices into a fixed palette, so each thread becomes the nearest palette entry.
  • Trims: implicit.
  • Longest stitch per record: 12.7 mm; anything longer is written as two.
  • HUS is compressed; it is decoded fully in the browser.

Inside a PES file

  • Read by: Brother, Baby Lock and older Bernina machines.
  • Colours: colours as indices into a fixed palette, so each thread becomes the nearest palette entry.
  • Trims: implicit (jump flags).
  • Longest stitch per record: 12.7 mm; anything longer is written as two.
  • Written as version 1 with an embedded PEC block, which every Brother machine since the 1990s reads.

When you need this conversion

Designs are sold in the format of the digitiser's software, and HUS is common because older Husqvarna Viking machines use it. If your machine is one of the Brother, Baby Lock and older Bernina models, it wants PES. The stitches are the same; only the container changes, and the notes above are the whole list of what the container cannot carry. Applique designs built in the studio can be downloaded in PES directly, without converting.

DST → PESJEF → PESVP3 → PESXXX → PES

How to use it

  1. 1

    Drop the HUS file

    Drag it onto the page or click to choose it. The file is decoded on your device and drawn on a hoop grid with its size, stitch count and colour blocks.

  2. 2

    Choose PES

    Pick the output format. Rotate or mirror here if the placement needs it; centring on the origin is what most machines expect.

  3. 3

    Download

    The file is written and read back on your device before the download starts.

  4. 4

    Copy the colours over

    Open the result in the viewer to check the colours the PES now stores against the design's colour sheet.

Questions

What changes when converting HUS to PES?

HUS is a compressed Husqvarna format. It is decoded fully in the browser and rewritten as a PES version 1 file; the colour palette maps to the nearest Brother thread.

Which machines read PES?

Brother, Baby Lock and older Bernina machines. Written as version 1 with an embedded PEC block, which every Brother machine since the 1990s reads.

Will the PES file stitch identically?

Yes for geometry: every needle position is kept to 0.1 mm. Colour and trim behaviour follow the target format's capabilities, described on this page.

Is the file uploaded?

No. Reading and writing happen in your browser; close the tab and nothing remains.

Does this work on applique designs?

Yes; placement, tack-down and satin blocks convert like any other stitches. If you need the cut file for an applique design you already own, use the cut-file tool after converting.

Learn

More tools